banner

product

  • pic
  • pic
  • pic

drip irrigation flat dripper mold


Product parameters:

inquiry

Inline flat dripper mold

Mold major technical indicators:


The mold cavity adopts a three-plate modular type, which can replace labyrinth plates with different flow rates.

The mold structure adopts evenly balanced latent gates, the ejector pin is ejected, and the ejector lever type is used for ejector, so that the mold opening stroke is not more than 60 mm and the automatic production is achieved.

Mold materials used in Sweden high-quality mold steel S136H, HRC50-52, mold life of more than 3 million times.

Die processing accuracy of ± 0.01mm, roughness Ra0.1, sub-mirror effect

The dripper has a manufacturing deviation Cu of less than 1%.

The dripper flow deviation coefficient is less than 4%.

Production cycle time is not more than 10 seconds.

dripper moldirrigation dripperinline flat dripper irrigation drip

Mold major technical indicators:


The mold cavity adopts a three-plate modular type, which can replace labyrinth plates with different flow rates.

The mold structure adopts evenly balanced latent gates, the ejector pin is ejected, and the ejector lever type is used for ejector, so that the mold opening stroke is not more than 60 mm and the automatic production is achieved.

Mold materials used in Sweden high-quality mold steel S136H, HRC50-52, mold life of more than 3 million times.

Die processing accuracy of ± 0.01mm, roughness Ra0.1, sub-mirror effect

The dripper has a manufacturing deviation Cu of less than 1%.

The dripper flow deviation coefficient is less than 4%.

Production cycle time is not more than 10 seconds.

The dripper mold introduction

1.Dripper’s shape and size can be customized as required.

2.Dripper’s water flow: 0.8 L/H to 8 L/H.

3.The dripper mold’s number of cavities.

4.The mold type: cold runner,half hot runner,all hot runner.

Technical parameters of  the dripper mold

Cavity quantity Thirty-two cavities Sixty-four cavities One hundred and twenty-eight cavities Note
 Overall dimensions of the mold(mm) 450*420*650 500*390*455 500*450*455
 Gate forms  Submarine gate/cold(hot)runner inlet Submarine gate/hot runner inlet Submarine gate/hot runner inlet Balance material feeding, automatically interrupted pouring
 Pushing-out mode Secondary pushing-out of ejector pin Secondary pushing-out of ejector pin Secondary pushing-out of ejector pin Making sure that the final products will drop off automatically
Cooling mode Water-cycle cooling Water-cycle cooling Water-cycle cooling
Working mode Automatic production Automatic production Automatic production
Service life  Five million times   Five million times  Five million times
Producing deviation ≤5% ≤5% ≤5% Deviation of emitter flowing rate
Model of injection molding machine for it SA1600 SA1600 SA2000/SA2500

 

drip irrigation

Company introduction

Our company specialize in agriculture water saving irrigation machines,fitting molds and fittings, including the drip irrigation tape/pipe, micro spraying tape, fittings and valves, plastic film. Our company is one plastic machine company with 31 years of history and in the leading position of the CHINA water saving irrigation equipments filed.

drip irrigation factory

inquiry

Welcome to our company's website, thank you for your letter, we will reply to you at the first time, please leave your information and contact information!




May you like